We are casting for architectural hardware accessories, marine parts, automobile parts, etc. These are all can be made by investment casting. The lost wax casting features are suitable for complex shapes, multiple materials, and mass production.
We are casting for architectural hardware accessories, marine parts, automobile parts, etc. These are all can be made by investment casting. The lost wax casting features are suitable for complex shapes, multiple materials, and mass production.
| Name | Australia Investment Casting Propellers and Turbines |
| Place of Origin | ShanDong,China |
| Brand Name | Hengke |
| Material | Stainless,steel carbon steel,aluminum |
| Application | Industry |
| Surface treatment | Painting,shot blasting,polishing |
| Service | OEM customization |
| Certification | ISO9001/BV/DNV |
| Quality Control | 100% Inspection |
Dongying hengke precision metal co., ltd is established in 1988 with a registered capital of 5 million Yuan.It covers an area of 48000 square meters with a building area of 30000 square meters. The company has 240 stuff including more than 38 technicians. Our company specializes in casting and machining.Annual production capacity reaches 1800 tons,Silica sol is used in the production line.Castings can be poured in stainless steel, heat resistant steel, carbon steel, alloy steel, non-ferrous alloy material.Company products are mainly used in automobiles, fluid chemical industry, food machinery, building hardware, medical equipment, industrial locks, electrical equipment, Petroleum equipment, heat treatment equipment, etc.The company owns 220 sets of various types of precision casting equipment, 60 sets of machining equipment and a variety of testing equipment including a hardness tester, a tensile testing machine, an ultrasonic wave detector, a spectrum analyzer, and a CMM coordinate measuring machine.At present more than 95% of products exported to the European Union,the United States, Japan, Australia and Taiwan and other countries and regions.
There are many testing equipment, for example, spectrum machine, three dimensional inspection machine, projector, hardness test machine(HR), hardness test machine(BR), tensile testing machine, impact testing machine, dynamic balancing machine,salt spraying tester, X-ray inspection equipment, ultrasonic inspection machine, magnetic detection equipment, staining test, metallography microscope, pressure testing device and many kinds of general inspection gauges. Meanwhile, our company also has special gauges of our own design.
What is Sand Casting?
Sand casting, is a metal casting process by using sand as the mold material. So it is also called sand molded casting. The term “sand casting” can also refer to a metal part produced via the sand casting process. Professional factory that produces sand castings are called sand casting foundry. Currently, nearly 60% of metal castings are produced via sand casting process.
Sand casting is relatively cheap and sufficiently refractory even for steel foundry use. Besides the sand, we will also mix a suitable bonding agent (usually clay) with the sand. The mixture is usually moistened, typically with water, but sometimes with other substances, to develop the strength and plasticity of the clay and to make the aggregate suitable for molding. The sand is typically placed in a system of frames or mold boxes known as a flask. The mold cavities and gate system are created by compacting the sand around models, or patterns, or carved directly into the sand.
