We are casting for architectural hardware accessories, marine parts, automobile parts, etc. These are all can be made by investment casting. The lost wax casting features are suitable for complex shapes, multiple materials, and mass production.
ucket teeth are the most typical products made by casting at CFS Foundry. Many people are well-known for the usage of bucket teeth but might not beunfamiliar with the manufacturing process.
To ensure high precision and excellent mechanical properties, we use investment casting process to create various types of bucket teeth. The investment casting process used by CFS Foundry ensures the production of high-quality bucket teeth with superior durability, precision, and performance, making them ideal for demanding construction and excavation applications. Here is a breakdown of the process steps for bucket teeth manufacturing at our Foundry.
The material of bucket teeth in casting from our foundry is low alloy steel with main elements C, Si, Mn, Cr, Al, etc. Besides, to improve the wear resistance for better working performance, we suggest adding some microelements, like Mo and Ni. Below are the detailed chemical composition and mechanical properties of our cast bucket teeth.
| Chemical Composition | |||||||
| C% | Si% | Mn% | Cr% | Mo% | Ni% | P% | S% |
| 0.26-0.30 | 1.20-1.50 | 1.00-1.30 | 1.60-1.80 | 0.20-0.30 | 0.40-0.60 | ≤0.025 | ≤0.025 |
| Mechanical Properties | |||||||
| Tensile | Yield | Elongation | Hardness | Impact | Wear(g/h) | ||
| N/mm² | N/mm² | A% | Surface | Inner | Room temperature | -40℃ | |
| ≥1500 | ≥1300 | ≥3 | 48-52HRC | 48-50HRC | ≥25J | ≥20J | 0.2-0.23 |
Dongying hengke precision metal co., ltd is established in 1988 with a registered capital of 5 million Yuan.It covers an area of 48000 square meters with a building area of 30000 square meters. The company has 240 stuff including more than 38 technicians. Our company specializes in casting and machining.Annual production capacity reaches 1800 tons,Silica sol is used in the production line.Castings can be poured in stainless steel, heat resistant steel, carbon steel, alloy steel, non-ferrous alloy material.Company products are mainly used in automobiles, fluid chemical industry, food machinery, building hardware, medical equipment, industrial locks, electrical equipment, Petroleum equipment, heat treatment equipment, etc.The company owns 220 sets of various types of precision casting equipment, 60 sets of machining equipment and a variety of testing equipment including a hardness tester, a tensile testing machine, an ultrasonic wave detector, a spectrum analyzer, and a CMM coordinate measuring machine.At present more than 95% of products exported to the European Union,the United States, Japan, Australia and Taiwan and other countries and regions.
There are many testing equipment, for example, spectrum machine, three dimensional inspection machine, projector, hardness test machine(HR), hardness test machine(BR), tensile testing machine, impact testing machine, dynamic balancing machine,salt spraying tester, X-ray inspection equipment, ultrasonic inspection machine, magnetic detection equipment, staining test, metallography microscope, pressure testing device and many kinds of general inspection gauges. Meanwhile, our company also has special gauges of our own design.
Bucket teeth are the critical tips or points used in heavy machinery like excavators, loaders, and backhoes. They can penetrate and break up tough materials like soil, rock, and debris effectively. When working, bucket teeth are fitted to an adaptor by a pin, then attached to the front edge of a bucket. As the teeth wear out, they can be replaced regularly to ensure efficiency, playing a important role in construction, mining, and earthmoving applications.
CFS Foundry is a professional bucket tooth manufacturer. In order to improve the wear resistance of bucket teeth, we use high strength alloy steel to produce bucket teeth, which can withstand long-term wear and prolong its service life. With more than 2,000 sets of molds, our investment casting process allows for the production of all shapes of bucket teeth, which can be assembled with different specifications of buckets.