We are casting for architectural hardware accessories, marine parts, automobile parts, etc. These are all can be made by investment casting. The lost wax casting features are suitable for complex shapes, multiple materials, and mass production.
We are casting for Carbon Steel Casting, marine parts, automobile parts, etc. These are all can be made by investment casting. The lost wax casting features are suitable for complex shapes, multiple materials, and mass production.
Carbon steel casting allows a variety of carbon steel alloys to be cast. Common cast carbon steel alloys are: AISI 1010, AISI 1020, AISI 1030, AISI 1035, AISI 1045, AISI 1060. The main difference between these alloys is their carbon content, as the carbon content increases, the steel generally becomes harder and stronger, but the ductility becomes less. Depending on the desired mechanical properties and intended application, CFS Foundry can help our customers select the right carbon steel grade.
| Carbon Steel Alloys | Carbon Content (%) | Main Features | Example Parts |
| AISI 1010 | 0.08 – 0.13 | Low carbon steel with excellent formability and weldability; low strength | Simple structural components, brackets, low-stress automotive parts |
| AISI 1020 | 0.18 – 0.23 | Low carbon steel with improved strength over AISI 1010; good ductility and weldability | Shafts, spindles, pins, machinery parts requiring moderate strength |
| AISI 1030 | 0.28 – 0.34 | Medium carbon steel; can be heat-treated for increased strength and hardness | Gears, axles, bolts, crankshafts |
| AISI 1035 | 0.32 – 0.38 | Medium carbon steel with higher strength and hardness; suitable for parts needing increased durability | Clutch discs, connecting rods, bolts |
| AISI 1045 | 0.43 – 0.50 | Medium carbon steel; can be flame or induction hardened; high strength and wear resistance | Axles, gears, shafts, machine parts requiring higher strength |
| AISI 1060 | 0.55 – 0.65 | High carbon steel; excellent strength and hardness; good wear resistance; can be fully hardened | Springs, blades, knives, agricultural tools |
Dongying hengke precision metal co., ltd is established in 1988 with a registered capital of 5 million Yuan.It covers an area of 48000 square meters with a building area of 30000 square meters. The company has 240 stuff including more than 38 technicians. Our company specializes in casting and machining.Annual production capacity reaches 1800 tons,Silica sol is used in the production line.Castings can be poured in stainless steel, heat resistant steel, carbon steel, alloy steel, non-ferrous alloy material.Company products are mainly used in automobiles, fluid chemical industry, food machinery, building hardware, medical equipment, industrial locks, electrical equipment, Petroleum equipment, heat treatment equipment, etc.The company owns 220 sets of various types of precision casting equipment, 60 sets of machining equipment and a variety of testing equipment including a hardness tester, a tensile testing machine, an ultrasonic wave detector, a spectrum analyzer, and a CMM coordinate measuring machine.At present more than 95% of products exported to the European Union,the United States, Japan, Australia and Taiwan and other countries and regions.
There are many testing equipment, for example, spectrum machine, three dimensional inspection machine, projector, hardness test machine(HR), hardness test machine(BR), tensile testing machine, impact testing machine, dynamic balancing machine,salt spraying tester, X-ray inspection equipment, ultrasonic inspection machine, magnetic detection equipment, staining test, metallography microscope, pressure testing device and many kinds of general inspection gauges. Meanwhile, our company also has special gauges of our own design.
What is Carbon Steel Casting?
Carbon steel casting is a steel casting process with carbon content ranging from 0.05% to 2.1% by weight. During its process, molten carbon steel is poured into a mold and fills the mold cavity quickly. After cooling and solidification, the specific shape is formed. The casting process at CFS Foundry usually invoves several steps to finish, including mold creation, wax patterns making, melting, pouring, cooling, also surface finishing.
Our company can create high quality carbon steel castings with high strength, toughness and wear resistance. These excellent properties make carbon steel casting ideal for many applications, such as automotive, agriculture, mining, and other industries. Carbon steel casting can produce parts with complex geometries that would be challenging to produce using forging or machining process.
Types of Carbon Steel for Casting:
Low carbon steel (< 0.20% C): Offer a range of tensile properties via heat treatment and can be hardened to give high surface hardness with abrasion resistance and good core ductility.
Medium carbon steel (0.20 to 0.50% C): This composition allows it to be more durable, pliable, and stronger. A range of tensile strengths are possible with good ductility and shock resistance, readily machined in the softened condition.
High carbon steel (> 0.50% C): Strong and has a good shape memory. This alloy steel for high tensile applications is subject to wear and abrasion and is suitable for heavy-duty applications as well.